Material: Steel 11SMnPb30. Max. Operating Angle 45°.

### Discontinued item. Please take universal joints type WE. ###

In their connecting dimensions, these universal joints comply with DIN 808. Their load capacity surpasses the performance required according to the DIN standard. The constructive features indicate that with extreme loads, e.g., shock or vibration loads, these joints should not be used. When pin holes are bored, do not bore through brackets. Pin holes can therefore only be positioned between brackets. Feather-key grooves can also only be machined between brackets, i.e. the keyways have to be cut offset by 90° to the brackets. The joints must not be shortened. The outer part of the joints is a thin-walled sleeve, which is pressed onto the carrier and the brackets. This sleeve gives the brackets additional support.


Zusätzliche Informationen

The supplied 3D models, pictures and technical drawings are made with reasonable care.
Nevertheless liability is excluded for the accuracy and correctness of this data.

( Available from stock without engagement / available within short time / Delivery period by arrangement. Please contact us. )

Product Quantity d1 H7
admiss.max.Torque at :100 min -1
200 rpm
300 rpm
400 rpm
500 rpm
700 rpm
800 rpm

go to Group

Imprint Terms and Conditions Help Index

Facebook YouTube Twitter Google + Xing LinkedIn